幂硬化介质中平面应力动态裂纹的尖端弹塑性场

本文采用塑性动力学方程,对幂硬化介质中平面应力动态裂纹尖端场进行了渐近分析,其结果表明:在裂纹尖端附近,应力具有的奇异性,应变具有的奇异性,其中A是一个与塑性区尺寸有关的常数因子,r是离开裂纹尖端的距离,n为硬化指数,文中给出了尖端场的控制参量D,它依赖于马赫数;并且给出了各物理量的角函数。     

Exact solutions for radial deformations of a functionally graded isotropic and incompressible second-order elastic cylinder

We find closed-form solutions for axisymmetric plane strain deformations of a functionally graded circular cylinder comprised of an isotropic and incompressible second-order elastic material with moduli varying only in the radial direction. Cylinder's inner and outer surfaces are loaded by hydrostatic pressures. These solutions are specialized to cases where only one of the two surfaces is loaded. It is found that for a linear through-the-thickness variation of the elastic moduli, the hoop stress for the first-order solution (or in a cylinder comprised of a linear elastic material) is a constant but that for the second-order solution varies through the thickness. The radial displacement, the radial stress and the hoop stress do not depend upon the second-order elastic constant but the hydrostatic pressure and hence the axial stress depends upon it. When the two elastic moduli vary as the radius raised to the power two or four, the radial and the hoop stresses in an infinite space with a pressurized cylindrical cavity equal the pressure in the cavity. For an affine variation of the elastic moduli, the hoop stress in an internally loaded cylinder made of a linear elastic isotropic and incompressible material at the point is the same as that in a homogeneous cylinder. Here R_in and R_ou equal, respectively, the inner and the outer radius of the undeformed cylinder and R the radial coordinate of a point in the unstressed reference configuration.     

Abnormal long wave dispersion phenomena in a slightly compressible elastic plate with non-classical boundary conditions

A two parameter asymptotic analysis is employed to investigate some unusual long wave dispersion phenomena in respect of symmetric motion in a nearly incompressible elastic plate. The plate is not subject to the usual classical traction free boundary conditions, but rather has its faces fixed, precluding any displacement on the boundary. The abnormal long wave behaviour results in the derivation of non-local approximations for symmetric motion, giving frequency as a function of wave number. Motivated by these approximations, the asymptotic forms of displacement components established and long wave asymptotic integration is carried out.     

AN EXACT METHOD OF BENDING OF ELASTIC THIN PLATES WITH ARBITRARY SHAPE

ＡＮ　ＥＸＡＣＴ　ＭＥＴＨＯＤ　ＯＦ　ＢＥＮＤＩＮＧ　ＯＦ　ＥＬＡＳＴＩＣ　ＴＨＩＮ　ＰＬＡＴＥＳ　ＷＩＴＨ　ＡＲＢＩＴＲＡＲＹ　ＳＨＡＰＥＺｈｏｕＤｉｎｇ（周叮）（ＲｅｃｅｉｖｅｄＡｐｒｉｌ１０，１９９５，ＲｅｖｉｓｅｄＡｐｒｉｌ２６．１９９６．Ｃ...     

阶跃扭矩作用下弹性圆柱壳冲击屈曲

本文首先基于Koiter初始后屈曲理论和Thompson离散坐标方法,给出了受扭圆柱壳的缺陷敏感性分析及冲击扭转屈曲渐近分析,并指出它对应于对称失稳的情形。然后通过求解受扭圆柱壳的非线性动力学方程,指出在阶跃扭矩作用下的后屈曲阶段,壳体的振动幅值剧增,周期变大。     

Complete Asymptotic Expansions of Solutions of the System of Elastostatics in the Presence of an Inclusion of Small Diameter and Detection of an Inclusion

We consider the system of elastostatics for an elastic medium consisting of an imperfection of small diameter, embedded in a homogeneous reference medium. The Lamé constants of the imperfection are different from those of the background medium. We establish a complete asymptotic formula for the displacement vector in terms of the reference Lamé constants, the location of the imperfection and its geometry. Our derivation is rigorous, and based on layer potential techniques. The asymptotic expansions in this paper are valid for an elastic imperfection with Lipschitz boundaries. In the course of derivation of the asymptotic formula, we introduce the concept of (generalized) elastic moment tensors (Pólya–Szegö tensor) and prove that the first order elastic moment tensor is symmetric and positive (negative)-definite. We also obtain estimation of its eigenvalue. We then apply these asymptotic formulas for the purpose of identifying with high precision the order of magnitude of the diameter of the elastic inclusion, its location, and its elastic moment tensors.     

Invariant Integrals in the Problem of a Crack on the Interface between Two Media

The equilibrium problem for an elastic body containing a crack on the interface between two media is considered. It is proved that there exist invariant (independent of the integration surface) integrals in this problem. The existence of invariant integrals is also established in the problem of a contact between an elastic body and a rigid stamp. Nonlinear boundary conditions of mutual non-penetration are prescribed on the contact boundaries. The physical meaning of invariant integrals is established.__________Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 46, No. 5, pp. 123–137, September–October, 2005.     

Contact interaction of a rigid heat-conducting punch with an elastic layer involving nonstationary frictional heating

A mathematical formulation is given and a solution is found to the quasistatic contact problem of thermoelasticity for a rigid heat-conducting punch moving over an elastic layer with fixed base. The interaction is accompanied by heating due to frictional forces obeying Amonton’s law. The problem is reduced to a system of integral equations with time-varying limits of integration. The structure of these equations depends on the type of thermal and physical conditions on the contact surface. An algorithm is proposed for the numerical solution of this kind of equations. The variation in the contact pressure and contact area with time is studied __________ Translated from Prikladnaya Mekhanika, Vol. 41, No. 12, pp. 35–46, December 2005.     

THE INTERACTION PROBLEM BETWEEN THE ELASTIC LINE INCLUSIONS

ＩｎｔｒｏｄｕｃｔｉｏｎＯｆａｌｌｔｈｅｆｉｂｅｒ＿ｒｅｉｎｆｏｒｃｅｄｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｓ,ｔｈｅｓｈｏｒｔ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌｎｏｔｏｎｌｙｓｔｒｅｎｇｔｈｅｎｓｔｈｅｍａｔｒｉｘｂｕｔａｖｏｉｄｓｄｅｆｅｃｔｉｏｎｓｏｆｔｈｅｌｏｎｇ＿ｆｉｂｅｒｃｏｍｐｏｓｉｔｅｍａｔｅｒｉａｌａｓｗｅｌｌ.Ｔｈｅｍｉｃｒｏ＿ｍｅｃｈａｎｉｃｓａｂｏｕｔｉｔｓｕｃｈａｓｆｒａｃｔｕｒｅ ,ｆａｔｉｇｕｅａｎｄｄａｍａｇｅｉｓｖｅｒｙｃｏｍｐｌｅｘ .Ｉｎｔｈｅｐｒｅｖｉ…     

A centrally cracked thin circular disk, Part I: 3D Elastic–plastic finite element analysis

A full field solution, based on small deformation, three-dimensional elastic–plastic finite element analysis of the centrally cracked thin disk under mode I loading has been performed. The solution for the stresses under small-scale yielding and lo!cally fully plastic state has been compared with the HRR plane stress solution. At the outside of the 3D zone, within a distance of rσ_o/J=18, HRR dominance is maintained in the presence of a significant amount of compressive stress along the crack flanks. Ahead of this region, the HRR field overestimate the stresses. These results demonstrate a completely reversed state of stress in the near crack front compared to that in the plane strain case. The combined effect of geometry and finite thickness of the specimen on elastic–plastic crack tip stress field has been explored. To the best of our knowledge, such an attempt in the published literature has not been made yet. For the qualitative assessment of the results some of the field parameters have been compared to the available experimental results of K, gives a fair estimate of the crack opening stress near the crack front at a distance of order 10⁻² in. On the basis of this analysis, the Linear Elastic Fracture Mechanics approach has been adopted in analyzing the fatigue crack extension experiments performed in the disk (Part II).